Descriptive Statistic Layers

Descriptive statistics in Tplyr are created using group_desc() function when creating a layer. While group_desc() allows you to set your target, by variables, and filter criteria, a great deal of the control of the layer comes from set_format_strings() where the actual summaries are declared.

tplyr_table(tplyr_adsl, TRT01P) %>% 
  add_layer(
    group_desc(AGE, by = "Age (years)", where= SAFFL=="Y") %>% 
      set_format_strings(
        "n"        = f_str("xx", n),
        "Mean (SD)"= f_str("xx.x (xx.xx)", mean, sd),
        "Median"   = f_str("xx.x", median),
        "Q1, Q3"   = f_str("xx, xx", q1, q3),
        "Min, Max" = f_str("xx, xx", min, max),
        "Missing"  = f_str("xx", missing)
      )
  ) %>% 
  build() %>% 
  kable()
row_label1 row_label2 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose ord_layer_index ord_layer_1 ord_layer_2
Age (years) n 86 84 84 1 1 1
Age (years) Mean (SD) 75.2 ( 8.59) 74.4 ( 7.89) 75.7 ( 8.29) 1 1 2
Age (years) Median 76.0 76.0 77.5 1 1 3
Age (years) Q1, Q3 69, 82 71, 80 71, 82 1 1 4
Age (years) Min, Max 52, 89 56, 88 51, 88 1 1 5
Age (years) Missing 0 0 0 1 1 6

Let’s walk through this call to set_format_strings to understand in detail what’s going on:

  1. The quoted strings on the left of the ‘=’ within set_format_strings() become the row label in the output. This allows you to define some custom text in set_format_strings() to explain the summary that is presented on the associated row. This text is fully in your control.
  2. On the right side of each equals is a call to f_str(). As explained in the vignette("Tplyr"), this is an object that captures a lot of metadata to understand how the strings should be presented.
  3. Within the f_str() call, you see x’s in quotes. This defines how you’d like the numbers formatted from the resulting summaries. The number of x’s you use on the left side of a decimal control the space allotted for an integer, and the right side controls the decimal precision. Decimals are rounded prior to string formatting - so no need to worry about that. Note that this forcefully sets the decimal and integer precision - Tplyr can automatically determine this for you as well, but more on that later.
  4. After the x’s there are unquoted variable names. This is where you specify the actual summaries that will be performed. Notice that some f_str() calls have two summaries specified. This allows you to put two summaries in the same string and present them on the same line.

But where do these summary names come from? And which ones does Tplyr have?

Built-in Summaries

We’ve built a number of default summaries into Tplyr, which allows you to perform these summaries without having to specify the functions to calculate them yourself. The summaries built in to Tplyr are listed below. In the second column are the names that you would use within an f_str() call to use them. In the third column, we have the syntax used to make the function call.

Statistic Variable Names Function Call
N n n()
Mean mean mean(.var, na.rm=TRUE)
Standard Deviation sd sd(.var, na.rm=TRUE)
Median median median(.var, na.rm=TRUE)
Variance var var(.var, na.rm=TRUE)
Minimum min min(.var, na.rm=TRUE)
Maximum max max(.var, na.rm=TRUE)
Interquartile Range iqr IQR(.var, na.rm=TRUE, type=getOption(‘tplyr.quantile_type’)
Q1 q1 quantile(.var, na.rm=TRUE, type=getOption(‘tplyr.quantile_type’))[[2]]
Q3 q3 quantile(.var, na.rm=TRUE, type=getOption(‘tplyr.quantile_type’))[[4]]
Missing missing sum(is.na(.var))

Notes About Built-in’s

Note that the only non-default option being used in any of the function calls above is na.rm=TRUE. It’s important to note that for min and max, when na.rm=TRUE is used with a vector that is all NA, these functions return Inf and -Inf respectively. When formatting the numbers, this is unexpected and also inconsistent with how other descriptive statistic functions, which return NA. Therefore, just for min and max, Inf’s are converted to NA so that they’ll align with the behavior of the empty parameter in f_str().

Using default settings of most descriptive statistic functions is typically fine, but with IQR, Q1, and Q3 note that there are several different quantile algorithms available in R. The default we chose to use is the R default of Type 7:

m = 1 − p.p[k] = (k − 1)/(n − 1).In this case, p[k] = mode[F(x[k])].This is used by S. That said, we still want to offer some flexibility here, so you can change the quantile algorithm by switching the tplyr.quantile_type option. If you’re intending to match the SAS definition, you can use Type 3. For more information, see the stats::quantile() documentation.

The example below demonstrates using the default quantile algorithm in R.

tplyr_table(tplyr_adsl, TRT01P) %>% 
  add_layer(
    group_desc(CUMDOSE) %>% 
      set_format_strings("Q1, Q3" = f_str('xxxxx, xxxxx', q1, q3))
  ) %>% 
  build() %>%
  select(-starts_with("ord")) %>% 
  kable()
row_label1 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose
Q1, Q3 0, 0 2646, 13959 1984, 9801

This next example demonstrates using quantile algorithm Type 3, which matches the SAS definition of:

Nearest even order statistic. γ = 0 if g = 0 and j is even, and 1 otherwise.

options(tplyr.quantile_type = 3)
tplyr_table(tplyr_adsl, TRT01P) %>% 
  add_layer(
    group_desc(CUMDOSE) %>% 
      set_format_strings("Q1, Q3" = f_str('xxxxx, xxxxx', q1, q3))
  ) %>% 
  build() %>% 
    select(-starts_with("ord")) %>% 
  kable()
row_label1 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose
Q1, Q3 0, 0 2565, 13959 1944, 9774

It’s up to you to determine which algorithm you should use - but we found it necessary to provide you with the flexibility to change this within the default summaries.

But what if Tplyr doesn’t offer you the summaries that you need?

Custom Summaries

We understand that our defaults may not cover every descriptive statistic that you’d like to see. That’s why we’ve opened to door to creating custom summaries. Custom summaries allow you to provide any function you’d like into a desc layer. You can focus on the derivation and how to calculate the number you want to see. Tplyr can consume this function, and use all the existing tools within Tplyr to produce the string formatted result alongside any of the default summaries we provide as well.

Custom summaries may be provided in two ways:

  • Through the tplyr.custom_summaries option set at your session level
  • Through the function set_custom_summaries() at the layer level

As with any other setting in Tplyr, the layer setting will always take precedence over any other setting.

Let’s look at an example.

tplyr_table(tplyr_adsl, TRT01P) %>%
  add_layer(
    group_desc(vars(AGE, HEIGHTBL), by = "Sepal Length") %>%
      set_custom_summaries(
        geometric_mean = exp(sum(log(.var[.var > 0]), na.rm=TRUE) / length(.var))
      ) %>%
      set_format_strings(
        'Geometric Mean (SD)' = f_str('xx.xx (xx.xxx)', geometric_mean, sd)
      )
  ) %>% 
  build() %>% 
  select(-starts_with("ord")) %>% 
  kable()
row_label1 row_label2 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose var2_Placebo var2_Xanomeline High Dose var2_Xanomeline Low Dose
Sepal Length Geometric Mean (SD) 74.70 ( 8.590) 73.94 ( 7.886) 75.18 ( 8.286) 162.17 (11.522) 165.51 (10.131) 163.11 (10.419)

Here, a few important things are demonstrated:

  • This is a multi-variable descriptive statistics layer. Both AGE and HEIGHTBL are being summarized in the same layer. AGE results go to the var1_ variables and HEIGHTBL results go to the var2_ variables.
  • The parameter names in set_custom_summaries(), or names on the left side of the equals, flow into set_format_strings() in the f_str() calls. Just like the default summaries, geometric_mean becomes the name that you refer to in order to use the geometric mean derivation in a summary.
  • In geometric mean, the target variable that you’re summarizing is referred to as .var. This may not seem intuitive. The reason we have to use .var is so that, like in this example, the custom function can be applied to each of the separate target variables.

Another note about custom summaries is that you’re able to overwrite the default summaries built into Tplyr as well. Don’t like the default summary functions that we provide? Use the tplyr.custom_summaries option to overwrite them in your session, and add any new ones that you would like to include.

For example, here we use the Tplyr default mean.

tplyr_table(tplyr_adsl, TRT01P) %>% 
  add_layer(
    group_desc(AGE) %>% 
      set_format_strings("Mean" = f_str('xx.xx', mean))
  ) %>% 
  build() %>% 
  kable()
row_label1 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose ord_layer_index ord_layer_1
Mean 75.21 74.38 75.67 1 1

But now, let’s overwrite mean using a custom summary. Let’s use a trimmed mean instead, taking 20% of observations off of both ends.

options(tplyr.custom_summaries = 
          rlang::quos(
            mean = mean(.var, na.rm=TRUE, trim=0.4)
          )
        )

tplyr_table(tplyr_adsl, TRT01P) %>% 
  add_layer(
    group_desc(AGE) %>% 
      set_format_strings("Mean" = f_str('xx.xx', mean))
  ) %>% 
  build() %>% 
  kable()
row_label1 var1_Placebo var1_Xanomeline High Dose var1_Xanomeline Low Dose ord_layer_index ord_layer_1
Mean 76.28 75.94 77.44 1 1

Note that the table code used to produce the output is the same. Now Tplyr used the custom summary function for mean as specified in the tplyr.custom_summaries option. Also note the use of rlang::quos(). We’ve done our best to mask this from the user everywhere possible and make the interfaces clean and intuitive, but a great deal of Tplyr is built using ‘rlang’ and non-standard evaluation. Within this option is one of the very few instances where a user needs to concern themselves with the use of quosures. If you’d like to learn more about non-standard evaluation and quosures, we recommend Section IV in Advanced R.